ВТОРАЯ СТРАНИЦА
Elevator ChainsElevator chains include poly paddles attached with 5/16" plated bolts and nuts (unless noted in the individual description). Chain features full side plates for added strength.
Application |
Description |
Part Number |
Retail Price |
410, 540 |
New Clean Grain Elevator Chain 124 links - 5 1/4" x 3 1/2" Rubber paddles every 4th link |
240610M92L |
$ 448 |
410, 510, 550 |
New Clean Grain Elevator Chain 112 links - 5 1/4" x 3 1/2" Rubber paddles every 4th |
248551M91L |
$ 628 |
550 |
New Clean Grain Elevator Chain 135 links 5 3/8" x 3 1/2" paddles every 4th link |
268341M91LP |
$ 758 |
750, 850 |
New Clean Grain Elevator Chain 140 links - 5 5/8" x 3 1/2" rubber paddles every 4th |
253167M91 |
$ 580 |
760, 860, 750 & 850 w/ extended elevator |
New Clean Grain Elevator Chain 172 links - 5 5/8" x 3 1/2" rubber paddles every 4th |
270725M91 |
$ 810 |
8560, 8570, 8590, 8780 |
New Clean Grain Elevator Chain 146 links - 9 1/2" x 3 1/8" rubber paddles every 4th |
2605873W91 |
$ 650 |
300, 410, 510, 550, |
New Return Grain Elevator Chain 45 links - 3 5/8" x 3 1/4" paddles every 4th link |
248504M91LP |
$ 305 |
750, 760, 850, 860 |
New Return Grain Elevator Chain 57 links - 3 5/8" x 3 1/4" rubber paddles every 4th link |
253665M91L |
$ 316 |
8590 |
New Return Grain Elevator Chain 154 links - 5 5/8" x 3 1/8" rubber paddles every 4th |
31-2605863L |
$ 583 |
Elevator Chain Sprockets
To extend the life of your chain assemblies, always replace the sprockets when installing a new chain.
Application |
Description |
Part Number |
Retail Price |
550 (ASN 236302121), 750, 760, 850, 860 |
New Clean Grain Elevator Chain Sprocket, Upper 8 Tooth, 1.125" |
255806M1 |
$ 60 |
8560,8570 |
New Clean Grain Elevator Chain Sprocket, Upper 11 Tooth, 1.250" Shaft |
2412960W1 |
$ 168 |
750, 760, 850, 860 |
New Clean Grain Elevator Chain Sprocket, Lower |
255806M1 |
$ 60 |
|
8 Tooth, 1.125" |
Hardened 255806M1H |
$ 72 |
8560,8570 |
New Clean Grain Elevator Chain Sprocket, Lower 11 Tooth, 1.500" Shaft |
2571510W1 |
$ 100.5 |
750, 760, 850, 860 |
New Return Grain Elevator Chain Sprocket, Upper |
255806M1 |
$ 60 |
|
8 Tooth, 1.125" |
Hardened 255806M1H |
$ 71 |
8560,8570 |
New Return Grain Elevator Chain Sprocket, Upper 8 Tooth, 1.125" Shaft |
9863040W1 |
$ 105.14 |
750, 760, 850, 860 |
New Return Grain Elevator Chain Sprocket, Lower 8 Tooth, 1.0625" Shaft |
270277M1 |
$ 62.44 |
Application Description |
Part Number |
Retail Price |
8560, 8570 New Return Grain Elevator Chain Sprocket, Lower 8 Tooth, 1.125" Shaft |
W9863030 |
$ 72.36 |
|
Unloading Auger Swing Cylinders
Application |
Description |
Part Number |
Retail Price |
750, 760, 850, 860 |
New Unloading Auger Swing Cylinder |
AM1748368M91 |
$ 638 |
Augers - Lower Clean Grain
All Abilene Machine augers are made with continuous roll formed flighting for accuracy and durability.
Application |
Description |
Part Number |
Retail Price |
750, 850 |
New Lower Clean Grain Auger 77.25" Long |
258839M91 |
$ 670 |
|
Bearing |
NPS100RPC |
$ 13.2 |
760, 860 |
New Lower Clean Grain Auger 87.25" Long |
273615M91 |
$ 480 |
|
Bearing |
NPS100RPC |
$ 13.2 |
Augers - Lower Return
All Abilene Machine augers are made with continuous roll formed flighting for accuracy and durability
Application |
Description |
Part Number |
Retail Price |
750, 850 |
New Return Grain Auger73.625" Long |
280384M91 |
$ 540 |
|
Bearing |
6206LL |
$ 24 |
|
Bearing |
NPS100RPC |
$ 13.2 |
760, 860 |
New Return Grain Auger83.625" Long |
280383M91 |
$ 536 |
|
Bearing |
6206LL |
$ 24 |
|
Bearing |
NPS100RPC |
$ 13.2 |
Augers - Bottom Bin Cross
All Abilene Machine augers are made with continuous roll formed flighting for accuracy and durability.
Application |
Description |
Part Number |
Retail Price |
750, 850 |
New Bottom Bin Cross Auger105.813" Long |
253847M91 |
$ 785.34 |
|
Bearing |
207FF |
$ 14.5 |
|
Bearing |
NPS100RPC |
$ 13.2 |
Unloading Auger Gears
Application |
Description |
Part Number |
Retail Price |
300, 410, 510, 550 |
New Unloading Auger Gear Round Bore 14 Tooth 15/16" |
250663M2 |
$ 134.90 |
410, 510, 550 |
New Unloading Auger Gear Round Bore 14 Tooth 1 1/8" |
238979M2 |
$ 137.32 |
750, 850 |
New Unloading Auger Gear Hex Bore 14 Tooth |
258834M1 |
$ 180 |
750 (BSN 169613713), 760 (BSN174607663) |
Upper Unloading Auger Gear 14Tooth, .880" Hex ID, 3.490" OD 2Required |
254428M1 |
$ 130 |
750 (ASN 169613714), 760 (ASN174607664), 850, 860 |
Upper Unloading Auger Gear 14Tooth, .880" Hex ID, 3.625" OD 2Required |
265465M1 |
$ 140 |
750, 760, 850, 860 |
New Unloading Auger Gear Round Bore 20 Tooth 1 3/8" |
271608M |
$ 290 |
750, 760, 850, 860 |
New Unloading Auger Gear Round Bore 27 Tooth 1 5/16" |
271609M |
$ 340 |
Chaffers - Short Finger Top
|
|
|
|
|
Application |
|
Description |
Part Number |
Retail Price |
510,550 |
|
New Short Finger Top Chaffer43.38" x 34.00" |
252259M92 |
$ 876 |
750,850 |
|
New Short Finger Top Chaffer48.00" x 39.28" |
258643M92 |
$ 854 |
760,860 |
|
New Short Finger Top Chaffer58.00" x 39.28" |
273024M92 |
$ 892 |
8560, 8570 |
|
New Short Finger Top Chaffer49.86" x 78.75" |
2476473W91 |
$ 1380 |
8590 |
|
New Short Finger Top Chaffer57.86" x 78.75" |
2442033W91 |
$ 1430 |
Chaffers - Long Finger Top
Adjustable Long Finger Chaffers - Wire spacing is 1 5/8". Best for large seed crops such as corn and beans.
Application |
Description |
Part Number |
Retail Price |
760,860 |
New Long Finger Top Chaffer58.00" x 39.28" |
271491M92 |
$ 890 |
8560, 8570, 8780 |
New Long Finger Top Chaffer49.86" x 78.75" |
2527183W91 |
$ 1858 |
8590 |
New Long Finger Top Chaffer57.86" x 78.75" |
2512023W91 |
$ 934 |
Application |
Description |
Part Number |
Retail Price |
510,550 |
New Short Finger Middle Chaffer43.38" x 39.50" |
228135M91 |
$ 836 |
750,850 |
New Short Finger Middle Chaffer48.00" x 39.28" |
293027M91 |
$ 648 |
760,860 |
New Short Finger Middle Chaffer58.00" x 39.28" |
293026M91 |
$ 1064 |
Sieves - Blunt Finger Bottom
Adjustable blunt finger sieves. Wire spacing is 1 1/8". Best used with cereal and fine seed grains
Application |
Description |
Part Number |
Retail Price |
510,550 |
New Blunt Finger Bottom Sieve43.38" x 39.50" |
228136M91 |
$ 868 |
750,850 |
New Blunt Finger Bottom Sieve48.00" x 39.28" |
259196M93 |
$ 548 |
760,860 |
New Blunt Finger Bottom Sieve58.00" x 39.28" |
274095M93 |
$ 706 |
8560, 8570 |
New Blunt Finger Bottom Sieve50.38" x 58.00" |
2476463W91 |
$ 2112 |
8590 |
New Blunt Finger Bottom Sieve58.38" x 58.00" |
2442043W91 |
$ 1603 |
Grain Pans and Components
Our grain pans are built heavier than OEM and have galvanized pans to prevent rusting. Ripple pan may be ordered separately. Replaceable front sections are available.
Application |
Description |
Part Number |
Retail Price |
510, 550 |
New Galvanized Pan Insert, Front For 3 piece style grain pans. Due to OEM variations, the fins for front pans are included but not mounted. Includes mounting hardware. |
GPMF-510-2G |
$ 320 |
750, 751, 850, 851, 852, 855 |
New Galvanized Grain Pan With Front Pans 3 piece style grain pan |
GPMF-750-13G |
$ 2050 |
750, 850 |
New Galvanized Pan Inserts, Front With Fins For 3 piece style grain pans. Due to OEM variations, the fins for front pans are included but not mounted. Includes mounting hardware. |
GPMF-750-FG |
$ 320 |
750, 850 |
New Galvanized Pan Inserts, Rear With Fins For 3 piece style grain pans. Due to OEM variations, the fins for front pans are included but not mounted. Includes mounting hardware. |
GPMF-750-RG |
$ 400 |
760, 860 |
New Galvanized Grain Pan With Front Pans 3 piece style grain pan |
GPMF-760-13G |
$ 2790 |
760, 860 |
New Galvanized Pan Inserts, Front With Fins For 3 piece style grain pans |
GPMF-760-FG |
$ 320 |
760, 860 |
New Galvanized Pan Inserts, Rear With Fins For 3 piece style grain pans. Due to OEM variations, the fins for front pans are included but not mounted. Includes mounting hardware. |
GPMF-760-RG |
$ 400 |
Straw Walkers and Components
Application |
Description |
Part Number |
Retail Price |
850 (ASN 27554), 855 SP (ASN 27554), 860 (ASN |
New |
284886M1 |
$ 120 |
19115), 865 (ASN 19115) |
15.310" |
|
|
Straw Chopper Blades and Components
Hardened steel chopper blades. Hardware included on most kits.
Application |
Description |
Part Number |
Retail Price |
510 (11 sets), 540 (7 sets), 550 (11 sets), 750 (12 sets), 760 (14 sets), 850 (12 sets), 860 (14 sets) |
New Straw Chopper Blades Set of 3 w/ hardware |
71310275 |
$ 40 |
8560, 8570, 8750, 8780 |
New Straw Chopper Blades Double Bevel, Set of 2 w/o Hardware |
SCB310DB |
$ 43.2 |
Massey Ferguson® - Combine Application Description Part Number Retail Price 15' 1859 Ridgid Tables ASN 1859056180 with Electrical New 245948M1 $ 406 410, 510, 540, 550, 750, 760, 850, 860, Corn Heads - 24, 33, 34, 43, 44, 44-0, New Header Drive Shaft Nut 249677M1 $ 4.24 Short / Long Row Crop Dividers Application Description Part Number Retail Price 1859, 2381, 9000 Series Flex Heads New Short Divider Tip SCD250 $ 110 Spindles Spindle forgings are made of high grades of alloy steel and assembled to exact designed specifications. All spindles are designed to meet or exceed OEM specifications. Application Description Part Number Retail Price 750, 850, 760, 860 New Spindle Straight fine splines 1.745" diameter upright shaft 274332M91 $ 86.80 750, 850, 760, 860 New Spindle Heavy Duty, Tapered course splines 1.870" diameter upright shaft 280297M92 $ 472 Steering Arms Application Description Part Number Retail Price 750, 760, 850, 860 New Steering Arm - Left Hand Has straight fine spline to fit AM274332M91 spindle. 274330M1 $ 214 Air Conditioning and Components Application Description Part Number Retail Price
The listed parts are all manufactured by various manufacturers. The use of the original manufacturer's part numbers, e.g. CASE® and John Deere®, are for reference purposes only — the parts offered are not original manufacturer's parts. We sell replacement parts for use in the equipment of various manufacturers. Our company and the listed parts contained herein are not sponsored, affiliated, or otherwise connected in any way with the equipment manufacturers named in this catalog.



















